The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

MP&C · 03-26-2013, 10:11 PM

Continuing on to the driver's side, this one is a bit tighter at the bottom than the other, shows about 1/32 gap. Used the compass again to mark the cut line...

Tacked, welded, and welds dressed...

All finished for this evening, have a couple pin holes to fix, will get them when we do the top...

New gap is right at 5/32", or to be more technical, one paint stick width....

03-26-2013, 10:11 PM	#24
MP&C Registered User Join Date: Jan 2013 Location: Leonardtown, MD Posts: 1,633	Re: 55 Wagon Progress Continuing on to the driver's side, this one is a bit tighter at the bottom than the other, shows about 1/32 gap. Used the compass again to mark the cut line... Tacked, welded, and welds dressed... All finished for this evening, have a couple pin holes to fix, will get them when we do the top... New gap is right at 5/32", or to be more technical, one paint stick width.... __________________ Robert