The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1969 C10 SWB

**CC69Rat** · 08-13-2011, 09:32 PM

Just some more pics we took today. This is the first time the truck has been out of the garage since January.

I have some work to do on my passenger rear step fender. It has a couple small dents in it but what you see here is pretty much out of the blaster and in first stage PPG Epoxy primer.

The front tires are too small, I know. I will probably pick up some a little bigger when I get a chance. These tires are only 24.5 tall. 215/65/15. The passenger front fender is sitting just shy of 26.5 off the ground (at the top of the fender lip) No way I could drive it like this with full length headers.

08-13-2011, 09:32 PM	#96
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: 1969 C10 SWB Stepside - Big Block project Just some more pics we took today. This is the first time the truck has been out of the garage since January. I have some work to do on my passenger rear step fender. It has a couple small dents in it but what you see here is pretty much out of the blaster and in first stage PPG Epoxy primer. The front tires are too small, I know. I will probably pick up some a little bigger when I get a chance. These tires are only 24.5 tall. 215/65/15. The passenger front fender is sitting just shy of 26.5 off the ground (at the top of the fender lip) No way I could drive it like this with full length headers. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)