|
Re: Project "It's a Jimmy Thing"
After i got the heater box in and hydraulic lines hooked up i filled up the power steering reservoir and the radiator. I wire nutted the electric fans in. I then test fired the engine to check for leaks and make sure the fans turn on. I don't have a scan tool and i got nervous because it was getting pretty hot and the fans had not turned on yet so i had to improvise. I robbed my kitchen for my girlfriends meat thermometer and taped it to the heater hose. It worked perfect. The fan kicked on at 180 degrees!
I also installed the glove box and glove box door. It is som much more fun installing part than taking them off!
|