The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

msg · 10-09-2020, 01:14 PM

Sweektk, did you run a 45 or a 90 type molded hose section? Im still waiting on the 45 fitting from ebay. Did you end up pointing the 45 fitting to point upward or sideways? I bought a 45 and thought it might work but Id have to see how the 45 fitting is best to angle of the manifold. If the 45 hose seems right I would try cutting the hose at the pump shorter ...about where the letter A and number 8 are on the hose. That might get is close.

10-09-2020, 01:14 PM	#22
msg Registered User Join Date: Feb 2013 Location: GA Posts: 1,313	Re: Water pump for an L31? Sweektk, did you run a 45 or a 90 type molded hose section? Im still waiting on the 45 fitting from ebay. Did you end up pointing the 45 fitting to point upward or sideways? I bought a 45 and thought it might work but Id have to see how the 45 fitting is best to angle of the manifold. If the 45 hose seems right I would try cutting the hose at the pump shorter ...about where the letter A and number 8 are on the hose. That might get is close. Attached Images __________________ Progress thread for my 66 http://67-72chevytrucks.com/vboard/s...d.php?t=623848 Last edited by msg; 10-09-2020 at 01:20 PM.