The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - eBay Long Tube header install... pics inside

BossHogg69 · 02-09-2012, 01:34 AM

It's run pretty similar now, I actually just welded the tips on today. Since I have the sway bar out back and went with a little larger pipe (2.5" now) they aren't turned down quite as steep as before, but close. I had the exhaust shop run the tailpipes and put the tips on, but they stuck out a little too far, so I cut them off and brought them up and in a little bit. I'll catch a video of how it sounds in the morning.

02-09-2012, 01:34 AM	#42
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: eBay Long Tube header install... pics inside It's run pretty similar now, I actually just welded the tips on today. Since I have the sway bar out back and went with a little larger pipe (2.5" now) they aren't turned down quite as steep as before, but close. I had the exhaust shop run the tailpipes and put the tips on, but they stuck out a little too far, so I cut them off and brought them up and in a little bit. I'll catch a video of how it sounds in the morning. Attached Images __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!