The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

STOCKISH · 07-15-2010, 11:20 AM

I modded my engine mounts and used some adapter plates from ebay. However, if you are doing a 6.0/4l80e and have to get a driveshaft made anyway, I would use the Early Classic Enterprises mounts. They look great and bolt right up. I wish I had used these. As far as the pump goes I recommend the Delco EP381 in tank pump. Works great and is quiet. I am not much help on the alt setup though. Hope it helps.

07-15-2010, 11:20 AM	#2
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: A few Questions I modded my engine mounts and used some adapter plates from ebay. However, if you are doing a 6.0/4l80e and have to get a driveshaft made anyway, I would use the Early Classic Enterprises mounts. They look great and bolt right up. I wish I had used these. As far as the pump goes I recommend the Delco EP381 in tank pump. Works great and is quiet. I am not much help on the alt setup though. Hope it helps. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.