The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - ID '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

**vetnat** · 07-04-2016, 01:53 AM

Thanks, that makes things clearer.

So, as long as brake fluid can be pushed through the valve, it should be OK? By gravity bleed, I assume you mean just letting fluid from the MC flow through the proportioning valve on its own? How long would you wait? Until you see brake fluid dripping out? Thanks again.

07-04-2016, 01:53 AM	#129
vetnat Senior Member Join Date: Jun 2015 Location: Moose Jaw, SK Posts: 510	Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch Thanks, that makes things clearer. So, as long as brake fluid can be pushed through the valve, it should be OK? By gravity bleed, I assume you mean just letting fluid from the MC flow through the proportioning valve on its own? How long would you wait? Until you see brake fluid dripping out? Thanks again. __________________ 1961 GMC half ton, short step, Canadian model. Just starting work on it.