Re: Mikey's 77 shortbox - Greenie
On the front side of the core support I'm using a parallel flow A/C Condenser (APDI 7013612) and a Derale transmission cooler. To make these work with the stock core support bolts I designed up some brackets and sent them out to get cut from 16ga steel.
On eBay I found a set of original AC lines that snake through the core support connecting to the condenser. After a couple of days soaking in evaporust they were good as new.
The transmission cooler is connected via stanless hardline leaving the transmission up to the core support, where it transitions into AN-6 flexible hose to the cooler.
|