The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**lks dcvn** · 07-23-2020, 10:58 AM

I recently replaced the non-working pins on 2 of my trucks. On some trucks, I think there is a small pad that bumps out on the a-pillar that they go into. I would need to check as the holes were already there - just the pins had gone bad and were no longer grounding.

They should tie into the 'courtesy light' /dome light harness under the dash. You can add the CL harness if you don't have it.

http://67-72chevytrucks.com/vboard/s...d.php?t=618187

Pin location thread - I need to check mine and see where they are compared to the hinges.

07-23-2020, 10:58 AM	#2
lks dcvn Registered User Join Date: Jan 2007 Location: Columbus, Ohio Posts: 4,338	Re: Door Jamb Switch I recently replaced the non-working pins on 2 of my trucks. On some trucks, I think there is a small pad that bumps out on the a-pillar that they go into. I would need to check as the holes were already there - just the pins had gone bad and were no longer grounding. They should tie into the 'courtesy light' /dome light harness under the dash. You can add the CL harness if you don't have it. http://67-72chevytrucks.com/vboard/s...d.php?t=618187 Pin location thread - I need to check mine and see where they are compared to the hinges. Last edited by lks dcvn; 07-23-2020 at 11:30 AM.