The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

88Stanger · 12-19-2018, 04:34 PM

I have a 5.3 with Flattop Pistons that i rebuilt and not to stock. I have a Holley intake, heads were mildly worked over, cable drive 92mm throttle body, headers, 4L60e, 3:42 posi, got rid of MAF and converted over to Speed Density, Cam kit is from WS6Store - Hot Cam Kit. Great piece. I will tell you though, depending on the Cam you do with and how your motor runs, if you have Power Brakes with Booster, you may have booster issues. Ask me how i know. I now have full Wilwood disc brake kit - everything and it is not cheap but damn they work now. Anyways, i like the cam, sounds healthy, got a good lope to it, but as mentioned it will reduce your at idle vacuum.

12-19-2018, 04:34 PM	#3
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,644	Re: Cam Swap on a ls 6.0 I have a 5.3 with Flattop Pistons that i rebuilt and not to stock. I have a Holley intake, heads were mildly worked over, cable drive 92mm throttle body, headers, 4L60e, 3:42 posi, got rid of MAF and converted over to Speed Density, Cam kit is from WS6Store - Hot Cam Kit. Great piece. I will tell you though, depending on the Cam you do with and how your motor runs, if you have Power Brakes with Booster, you may have booster issues. Ask me how i know. I now have full Wilwood disc brake kit - everything and it is not cheap but damn they work now. Anyways, i like the cam, sounds healthy, got a good lope to it, but as mentioned it will reduce your at idle vacuum.