|
Re: Starting Engine On Frame?
-
1. Positive side of the Battery to Starter
2. Negative side of the Battery to the Block
3. Remote start button to the Positive side of the Battery and to the "S" terminal on the starter solenoid.
4. Wire from Positive side of the Battery to BAT terminal on HEI (have an alligator clip on the battery end so you can unhook it easily to kill the engine)
5. Pour a little gas in carb if fuel system is not connected
6. Oil Pressure gauge hooked up or you will coat everything around you with oil
7. You may have to close the choke to get it to start.
LockDoc
|