[Vic1947]

The right side duct coming out of the evaporator is right in the way of the glove box arm. I get within about 3/4" of the door being closed and it hits the duct. Didn't want to punch a hole in it so I figured I'd do without and just be careful. However, another forum member suggested using a cable. So I decided to go that route. I believe it will be safer with a travel limiter.

I picked up the stops at AutoZone and already had some 1/16" aircraft cable so it was just a matter of modifying the existing arm and closing up the rectangular hole in the dash. The end at the glove box door is held captive and the cable moves thru the hole very easily - not even any need for a retractor. I put a little piece of shrink tubing over the cable end next to the stop to keep any sharp edges from puncturing the plastic duct tubing. Works nice and smooth and closes correctly.