The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project "Buffalo Blizzard Surprise" 71 SWB build

**derotoreut** · 07-28-2023, 10:09 PM

Drilled some holes in the firewall for my master cylinder and steering column. If you notice there's only two holes for the master and they're not studs. I drilled the stock pedal mount and installed rivet nuts in two holes for the master. This way I can use button head screws for a cleaner mount. The other holes have studs on the back of the firewall for mounting into the bracket.

Name: IMG_4857.jpeg
Views: 205
Size: 21.3 KB

Name: IMG_4857.jpeg
Views: 205
Size: 21.3 KB

Name: IMG_4861.jpeg
Views: 201
Size: 22.2 KB

Name: IMG_4860.jpeg
Views: 203
Size: 31.5 KB

07-28-2023, 10:09 PM	#124
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,847	Re: Project "Buffalo Blizzard Surprise" 71 SWB build Drilled some holes in the firewall for my master cylinder and steering column. If you notice there's only two holes for the master and they're not studs. I drilled the stock pedal mount and installed rivet nuts in two holes for the master. This way I can use button head screws for a cleaner mount. The other holes have studs on the back of the firewall for mounting into the bracket. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977