[jjzepplin]

I sure appreciate all the help! Where is the best place to buy ARP bolts? I noticed the Caps for the crank are numbered 1-5. The rods are not but there are numbers on one side of the rod and caps on all of them as well as the bearing tabs being on the same side. When turning the engine over without heads, it seemed to be normal with just the rings holding it back from free spinning. I still want to pull the pistons and check the rings for breakage and the pins for wear. It seems pretty solid though. It just throws me off that someone pulled a perfectly good engine. The rear seal area has absolutely no oil at all. It is coming off though so I can replace that barbell. Do you recommend the oil bypass plug?