I had to cut the back of the right hand side of the light to clear the tranny cooler, sorry forgot to take a pic. Same as the others have done on here.
Just checking that the hood still clears the mounting bolts.
I am going to try and make my own phantom grille to cover the main light and bars as well.
Following the advice form the others who have done this, it took me about 2 hours total.
Just have to lift the truck and remove the old bar, that will have a new home on the 72" mower or the skid steer.
I have got a 55mm thick bar with the same wattage just yesterday, so it will be going into the dually, because it has the electric fan in front of the ac cooler. I hope to make it so that the grille is not cut out.
There you go "mingoman", complete with a couple of pics