|
Re: LT1 GenV swap
Quote:
Originally Posted by r8e1d
How deep are you in the wiring? I'm trying to figure out the canbus. As far as I can tell there are 2 circuits needed, 1 for the FPCM and 1 for the trans. Sound right?
Red
|
Done with the wiring .. it's just a pass pass through. It goes on to trans, tee off into the trans, then goes out the trans to the one one of the connectors x115 or x125 and that's what will go to the obd port.
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|