Re: M22 in 68 c10
I used a 621 bellhousing with my M21 Muncie swap in my 68. I used the stock clutch fork and throw out bearing for the truck. My truck was originally a SM465 4 speed truck. One thing is you will have to change the starter. The 621 bellhousing take a different nose on the starter to fit properly. I had to take 2 starters to make one, but that was mean saving a buck and using what I had on hand. I also just bought a aftermarket crossmember to stick in it as being a 4 speed truck there was nothing there.
|