The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

CAL 58 GMC · 03-05-2006, 10:25 PM

After a long weekend in my garage, I got the Air Ride Shockwave bags in. I had to do some cutting were the spring pockets are for clearance. I really didn’t like the idea of hacking at the frame, but the end results were worth it. In the photo below with the bags completely deflated the engine crossmember is about 1 1/4 inches off the ground. When they were completely inflated the crossmember was about 5 inches.

03-05-2006, 10:25 PM	#105
CAL 58 GMC Senior Member Join Date: Jun 2005 Location: Clovis Ca. Posts: 3,311	Re: 58 GMC Project After a long weekend in my garage, I got the Air Ride Shockwave bags in. I had to do some cutting were the spring pockets are for clearance. I really didn’t like the idea of hacking at the frame, but the end results were worth it. In the photo below with the bags completely deflated the engine crossmember is about 1 1/4 inches off the ground. When they were completely inflated the crossmember was about 5 inches. Attached Images Last edited by CAL 58 GMC; 03-06-2006 at 12:36 AM.