The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**old Rusty C10** · 10-21-2019, 12:17 PM

the bed should sit square on the frame. I just had this problem with my C20 that was hit on the side. I ended up finding out the bolts in the rear cab mounts were bent. I used new bolts and some shims and she sits fine now

10-21-2019, 12:17 PM	#5
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,260	Re: Help please. Bed alignment issue. the bed should sit square on the frame. I just had this problem with my C20 that was hit on the side. I ended up finding out the bolts in the rear cab mounts were bent. I used new bolts and some shims and she sits fine now __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!