Quote:
Originally Posted by low57
The fleetside bed should sit on rubber spacer blocks similar to the cab mount rubber spacers i believe. The rubber spacers is what i have used to get the cab body line and fleetside line to be even during mock up.
|
You may need, and can use the spacers, I am doing the same with mine to gain clearance at the gas tank and under the cab, radiator support will need some too. When I pulled my original bed there was nothing but some very thin, less than 1/16", rubber pieces I assume for squeak abatement. It had not been off the truck before, I bought it originally from the second owner in 1976.