Re: Edelbrock 600cfm carb idle will not stay steady
Check your centrifugal advance weight bushings and weak springs in distributor. Replace if worn, make sure they are greased. You may be getting unwanted distributor advance creeping in at idle. You can check this with a timing gun. Make sure your centrifugal advance is starting above 1,000 rpms.
__________________
1969 Custom Camper C20; Factree Air, 350/TH400/Dana 70U with C30 wheel cylinders, Disk brakes, H4 conversion, headlight relay mod, 3G 135 amp alternator. 7500 GVW
|