We have been putting a quite bit of thought into how we wanted to go with the front bumper. We had been throwing the ideas of a pre-runner style bumper and a stock bumper around and we finally decided that since we already had a stock bumper on the GMC we would pull it off and play with ways we could make it work.
It was pretty bent so we decided to play around with it in the press to see how straight we could get it. We also welded up the stock mounting holes to get a cleaner look
After we got her pretty straight we played around and layed out a few holes
We used a holesaw to cut the holes out then used the press and a set of dimple dies to flare the holes
