View Single Post
Old 10-15-2018, 02:40 PM   #6
sweetk30
Registered User
 
sweetk30's Avatar
 
Join Date: May 2012
Location: horseheads,ny rust belt
Posts: 2,794
Re: Trans cooler, too big?

x2 on too cold a fluid .

add a gauge in the pan AND 2nd sender in hot line out from trans to cooler . then install toggle switch for the sender wires feeding the gauge . this will let you know how hot you are working the trans and for the reg driving just the pan temp will be fine . . . only if you like to know lots of info do it this way .

also they do make automatic thermo switches for fluid control that you can plumb inline so it flows stock and when it gets to a specific point ( temp range you ordered ) it will flip the flow and run to the cooler . then when cooled down back to normal . https://www.summitracing.com/search/...9%2B4294882595

and yes to good temp range is 180* .

i remember my old c3500 with 4l80-e would not lockup in 4th untill the engine coolant was atleast 140* warm . so even gm knows to cold is not good .
__________________
77-k30lb BIG truck build .
87-k30lb budget beater build .
85-k30lb the plow machine build .
85-c10sb summer fun toy .
-----------------------------
HOLLEY SNIPER efi = worst case of p.i.t.a i ever had .

EDELBROCK pro flo 4 = best deal going so far . love my setup works great.
sweetk30 is offline   Reply With Quote