I was also able to get the truck out of the garage (under it's own power and with open headers!) and set up my lift ramps. I am still cramped on space, so the photos aren't the best, but I do what I can. Let me know if you have any questions/picture requests.
The first photo is the Boyd's welding tank and fuel supply line. I went for some future proofing and installed -8 (1/2") hard line from the front to the back of the truck. and connected it to the tank using some fancy -8AN fittings/hose. I think that short flex line was at least $65, I used the fancy stuff that was e85 compatible and super flexible (picture 2). I used some
aluminum mounting blocks from amazon, and drilled them out to use a through-bolt into a rivnut (picture 3). I want to use the same lines when I go fuel injected LS. I am running the stock mechanical fuel pump for now. I will add an in-tank pump later. I will also add a -6 return line.