The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - PROJECT "Father/Son" C-20 Rolling Chassis Build

**ChiefRocka** · 11-21-2007, 07:41 PM

-

The shock are working perfect...plenty of clearance.

I am going to drill and tap extra holes for adjustment location of the upper shock mount. This top hole is to be used if we ever go with a 'canti' set-up in the rear. The hole we will be using is actually going to be 3" lower...this will allow max lift with the bags in the stock location (the way were running it)

11-21-2007, 07:41 PM	#122
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: PROJECT "Father/Son" C-20 Rolling Chassis Build - - - The shock are working perfect...plenty of clearance. I am going to drill and tap extra holes for adjustment location of the upper shock mount. This top hole is to be used if we ever go with a 'canti' set-up in the rear. The hole we will be using is actually going to be 3" lower...this will allow max lift with the bags in the stock location (the way were running it) __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"