The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1956 Chevy Pro-Street Build

ptc · 06-05-2015, 02:53 PM

Thanks Guys for the comments....

The cab is still outside so I use a bit of rattle can primer to just keep the rust from coming back too quick!!! Its all gonna be blasted when its done and a heavy coat of prime put on then.

More things done - rough-ed in the bed holes, rail ends and fitted some of the other parts. I have decided to go with new steps and rear fenders, just dont want to waste time and money on these to make them right. I did cut out the air vents, man that area collects alot of DEBRIS!!!! glad to be rid of them. Then I welded in new corners at the bottoms that were rusted out. I made my own patch panels like KEES does! thanks Buddy for the incentive.

06-05-2015, 02:53 PM	#65
ptc Registered User Join Date: Mar 2015 Location: Morada, CA --- (Near Lodi) Posts: 1,443	Re: 1956 Chevy Pro-Street Build Thanks Guys for the comments.... The cab is still outside so I use a bit of rattle can primer to just keep the rust from coming back too quick!!! Its all gonna be blasted when its done and a heavy coat of prime put on then. More things done - rough-ed in the bed holes, rail ends and fitted some of the other parts. I have decided to go with new steps and rear fenders, just dont want to waste time and money on these to make them right. I did cut out the air vents, man that area collects alot of DEBRIS!!!! glad to be rid of them. Then I welded in new corners at the bottoms that were rusted out. I made my own patch panels like KEES does! thanks Buddy for the incentive. Attached Images __________________ My Build: 57 Chevy Pro-Street Last edited by ptc; 11-11-2015 at 07:42 PM.