|
Re: HEI and Starter wiring?
There should be a green wire coming from the firewall wire harness that you need to put a spaid terminal on to the HEI on the (BAT) side. Its a switched power source from the fuse block. The other terminal is simply for a tach. There should be a couple different green wires. Use a test light to determine which one is a switched power source, the temp one wont have any power. The starter is a heavy gauge red wire with a larger eyelit terminal on it that you shouldnt have to mess with. theres also a ground. As far as your one wire alternator goes you need to run one wire from the alternator to the battery to maintain the charge. and the other wire comes from the firewall and I believe is purple
|