Quote:
Originally Posted by 72LB
Putting in a constant pressure valve body in the 700 makes the tv cable adjustment not as critical. I'm currently gathering everything for a 700 swap in mine w/3.08 gears currently and have done a bit of research in to the swap. Kwmech is right as the 700 rebuild won't be cheap.
|
if you are saying that you are planning to keep the 3.08s and install a 700R4 - depending on your tire size, you may be unhappy with the results. The O/D + 3.08 combo can set you up to lug the engine rpm at lower highway speeds (50-60ish). Just something to think about. If you share your tire diameter, I can tell you precisely what to expect - but below is your scenario for a 30" tire. Note 1300-ish rpm at 55 mph. Not really where you want to be when you have to be at 55 for whatever reason.