Quote:
Originally Posted by sweetk30
so is your truck 2wd ?
c=2wd
k=4wd
not c=chevy and k=gmc .
the whole front suspension is bolted on a lot different from 2wd to 4wd . were a 4x4 mount bolts in the back half to the frame the 2wd stuff would be in this area along with tie rod ends and other items.
lots of the plow stuff is centered around 4wd . but some older setups did offer 2wd frames just not near as common to find .
i run the older fisher speedcast stuff and here is how it mounts up on a true k30 4x4 mid 80's frame . and even if it was a mm1 or mm2 system the truck side brackets mount in the same area just the stuff at the bumper was different .
and try here for older fisher and even current info / directions and parts break downs with drawings . http://library.fisherplows.com/publications.asp?cat=47
and here is one for the 2wd c-30 http://library.fisherplows.com/fishe...245_071890.pdf its not been made in years but was offered . and looks like they cut the back end off the plates and make the rear mounts and connector bars for it .
hope this info and pics helps . let us know how you make out . |
I like those bolt on brackets, are they from a certain plow manufactures mounting package?