The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How to: Cargo light in a non cargo cab by LFD Inc.

lsversaw · 12-16-2018, 07:49 AM

Like Samkost, I'm wondering where the 2 metal sleeves go. Do they go
over the rubber nut "shaft", after pushing the rubber nut shafts through the holes from behind the outer sheet metal? Seems logical, but I ended up with metal sleeves with ID smaller than the diameter of the rubber nut shaft. I can drill out the metal sleeves, but first I would like to know if I'm on the right track.

Thanks.

12-16-2018, 07:49 AM	#31
lsversaw Registered User Join Date: Aug 2013 Location: McPherson, KS Posts: 86	Re: How to: Cargo light in a non cargo cab by LFD Inc. Like Samkost, I'm wondering where the 2 metal sleeves go. Do they go over the rubber nut "shaft", after pushing the rubber nut shafts through the holes from behind the outer sheet metal? Seems logical, but I ended up with metal sleeves with ID smaller than the diameter of the rubber nut shaft. I can drill out the metal sleeves, but first I would like to know if I'm on the right track. Thanks.