View Single Post
Old 10-03-2012, 11:08 AM   #7
stevel
Registered User
 
stevel's Avatar
 
Join Date: Oct 2011
Location: enid ok.
Posts: 43
Re: Bypass Ignition switch

Still no luck .I found the 12 volt wire. however cant seem to find a wire to use for the crank. The harness from the firewall wires are
Black
Black-Blue
Blue
Brown
Purple
Black-Yellow
Green
Black-White
This harness plugs into the switch harness ,however the wire colors change on the harness to the switch.
Thought it would be as simple as hooking the proper wires together.
Any other advise please?
stevel is offline   Reply With Quote