The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - pdx-sanity66

**pdxhall** · 11-10-2022, 12:54 PM

I'm working on getting the rear bumper ready for another coat of epoxy. I've got a couple of small dents ts deal with first. I have also been working on repairing 3 cage nuts on the nuts that hold the door panel in place. I've got the one on the pass. door done and 1 of the 2 on the driver's side done. The last one is torn out a little more than the first 2, but still easily repaired. I wanted to get this done before working on the side window assembly.
I put a WTB on the appropriate parts page but I've had no response so I'll put it up here. I am looking for a very nice original driver's side vent window handle.
It doesn't need to be NOS but needs to have no pitting.

11-10-2022, 12:54 PM	#957
pdxhall Senior Member Join Date: Mar 2011 Location: Tucson, Arizona Posts: 2,063	Re: pdx-sanity66 I'm working on getting the rear bumper ready for another coat of epoxy. I've got a couple of small dents ts deal with first. I have also been working on repairing 3 cage nuts on the nuts that hold the door panel in place. I've got the one on the pass. door done and 1 of the 2 on the driver's side done. The last one is torn out a little more than the first 2, but still easily repaired. I wanted to get this done before working on the side window assembly. I put a WTB on the appropriate parts page but I've had no response so I'll put it up here. I am looking for a very nice original driver's side vent window handle. It doesn't need to be NOS but needs to have no pitting. __________________ Sanity'66 http://67-72chevytrucks.com/vboard/s...d.php?t=515110 Long bed, Fleetside, Small back window I've Done So Much, With So Little, For So Long, That Now I Can Do Anything With Nothing.