[Gregski]

Transfer Slot Adjustment (using the Idle Speed Screw... it's not just for mocking with the RPMs you know)

so we need to make the transfer slot look like a square, easy to do with the carb off, but how do we get back to a square after messing with it on the truck

well on my carb I figured out that after I gently bottom out the Idle Speed screw it takes 7 turns to undo it to the point where the transfer slot disappears completely, so that gets us half way there

then it just so happens that if I turn the screw in 1.5 turns we get a perfect square

hey 1.5 (kinda like the idle mixture screw) even I can remember that

so now with the carb on the truck we know how to get back to a square if we have to, (try it on yours with the carb off first as your mileage may very)

just trying to show you it from different angles in the pics, hard to do this with one hand holding the camera etc as a one man job