The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Jl8806 · 01-23-2018, 11:45 AM

I know this horse has been beat to death already but after reading for hours im still not 100% for sure on what i need... I had rather not swap the crossmember. Im planning on going thru the front end with new parts anyways, so can i use 71-72 spindles, ball joints & tie rods and leave everything else the same? I guess i'm going to go with aftermarket 6 lug rotors so i dont have 5 on the front and 6 on the back.

01-23-2018, 11:45 AM	#1
Jl8806 Registered User Join Date: Jan 2018 Location: Kentucky Posts: 59	'68 disc brake conversion... I know this horse has been beat to death already but after reading for hours im still not 100% for sure on what i need... I had rather not swap the crossmember. Im planning on going thru the front end with new parts anyways, so can i use 71-72 spindles, ball joints & tie rods and leave everything else the same? I guess i'm going to go with aftermarket 6 lug rotors so i dont have 5 on the front and 6 on the back.