The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Is an AAM 10.5" rear end from a 2002 Chevy too wide for my fleetside '66 C20?

Rust-O-Matic · 12-04-2017, 02:03 AM

What a novel idea. I'm forever in debt to your priceless advice.

I searched all afternoon/evening; this forum, others, google, the 14 bolt bible. There dosent seem to be alot of info available on the '01 and newer full floaters, and some sites show conflicting info on widths and specifics. I am hoping someone who actually has experience with these specific parts can weigh in.

There is a very good writeup on here about a similar swap, but his measured narrower than the axle I'm lookin at, and I believe it was from a 1 ton.

12-04-2017, 02:03 AM	#3
Rust-O-Matic Registered User Join Date: Apr 2015 Location: Gallatin, MO Posts: 295	Re: Is an AAM 10.5" rear end from a 2002 Chevy too wide for my fleetside '66 C20? What a novel idea. I'm forever in debt to your priceless advice. I searched all afternoon/evening; this forum, others, google, the 14 bolt bible. There dosent seem to be alot of info available on the '01 and newer full floaters, and some sites show conflicting info on widths and specifics. I am hoping someone who actually has experience with these specific parts can weigh in. There is a very good writeup on here about a similar swap, but his measured narrower than the axle I'm lookin at, and I believe it was from a 1 ton.