The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**sfont66** · 08-08-2022, 10:19 PM

I originally had intended to mount my GM ECU /ECM computer under the dash. But in the end it was so hacked up by the auto salvage yard, I was forced to look at other options. I ended up with the Holley terminator x. As it turns out , the harness has plenty of length to mount the ECU under the bench seat on the passenger side.
I ran the harness down the back side of the engine along the underside of the transmission tunnel, and up under the passenger side of the bench seat.
Just an option for those with a hacked up harness, or no harness or those thinking of hiding the ECU and wiring a bit

08-08-2022, 10:19 PM	#8
sfont66 Senior Member Join Date: Nov 2015 Location: Pine City MN Posts: 356	Re: Computer mounting location I originally had intended to mount my GM ECU /ECM computer under the dash. But in the end it was so hacked up by the auto salvage yard, I was forced to look at other options. I ended up with the Holley terminator x. As it turns out , the harness has plenty of length to mount the ECU under the bench seat on the passenger side. I ran the harness down the back side of the engine along the underside of the transmission tunnel, and up under the passenger side of the bench seat. Just an option for those with a hacked up harness, or no harness or those thinking of hiding the ECU and wiring a bit __________________ 72 C10, Was a 350,M20, Brodix heads,Comp cam, Edelbrock intake&carb, Hedman hedders LWB. Project is now a 5.3(L33) w/PRC stage 2.5 CNC ported 243heads, BTR RedHot cam,Holley Terminator X, T56 magnum. SWB, Boyd tank. 4.5/4 Drop http://67-72chevytrucks.com/vboard/s...My72c10project