[PGSigns]

Depends on lots of things. What the truck will want as far as instant center and what you can get with the kit that you have may not line up. Until you see what the weight split looks like the amount of power you have when done and the total weight of the truck it will be hard to determine. You can map the four link out on paper and look at all the available combinations to see what the kit has. We would do this on the drag cars and shift the front bracket up and down to see where it needed to go to get us the range we wanted and then weld the brackets in the car. Then the chart we made with the map we drew was used to tune the car when we were done. There are programs out there that will do the work for you.
Jimmy