Re: Instant center location
With the lower bar level, you can set some general rules. A steeper angle on the top bar (down in front) will move the IC closer to the rear axle. A flatter angle (closer to ) but still down in front) will move the IC towards, or past, the front CL. * A flat ) angle top bar will be parallel with the lower bar and thus have NO weight transfer. - but is good for burnouts. Starting in the 5 to 7 degree range will get you somewhere close for these trucks.
__________________
GoodGuys 2012 Pro-Truck Champion
2012 Truckin' Throwdown Champion
GoodGuys 2011 National Champion
2011 Truckin' Throwdown Champion
GoodGuys 2010 National Champion
Proud to put our products up against all others!
|