|
Re: Rusty Roof Best Approach?
OK, so I started doing some exploratory sanding and was able to find the roof spot welds. Also, used a Dremel wire wheel to remove the filler between the roof lid and the back cab (see photo below). I was surprised how far down it went. Felt like I might have been able to get all the way through if I had a larger diameter wheel.
Can someone clarify for me how the rear roof lid is attached to the rear cab? Is the sealer/filler that I removed with the wire Dremel wheel all that holds it on back there? Or is it also spot welded from underneath? Thanks!
|