Quote:
Originally Posted by LockDoc
-
Looks like a good start. As far as the keys, check the door locks, one of them may have a code number stamped into it and you can get a key cut from that. (see pic below for sample of code #) If you don't find a code number, one of the door locks can be disassembled and a key made by reading the wafers. If none of the locks have been changed the key will fit the ignition. The doors and ignition were originally keyed the same on the '67-'72 trucks......
LockDoc
|
That is good to know! Here I was trying to figure out how to pull the ignition lock cylinder without destroying the switch.