Quote:
Originally Posted by hatzie
My crystal ball support license has lapsed so I can't see into the dash in your truck.
Without input from you I don't know exactly which ones you have so I can't comment on specifics just general info...
AXXESS talks to the steering wheel control buttons.
https://axxessinterfaces.com/product...s-instructions
PAC is the chime replacement. Since the T800 uses GM Class II databuss it could be Model RP3-GM11
These provide accessory power to turn the radio on with the ignition and off when the ignition is switched off and the driver door is opened or the ignition has been switched off for 10 minutes... as well as replacing the warning chimes that the Delphi radio originally provided.
https://pac-audio.com/products/radio-replacement/ |
Well you crystal ball is crystal clear. I created another problem. I went to audio place and the guy said what they do is find an ignition wire to splice into for a switched power. Said there was a brown wire under the dash. Well as I said, I am not a fan of cutting into wires...
I found, on the fuse box in the side of the dash , a brown plug that says ( BODY , 12 WAY, BROWN ). I found and unused switched power. I had some of the very same connectors and plugged into it... had switched power. Ran the wire up to the radio. Wanted to try the radio first, ARCED THE WIRE.... now no power and can't figure out where that power would be fused or come from.... I hooked it to the bottom left corner where the plug latches..... where would that fuse be. I check all the fuses and all appears to be fine