|
There are 2 adjustments that need to be checked. First: Since the problem started after a trans replacement, Check your shift rod adjustment. Does the shift indicator line up? Do the detents (lockouts) built into the column line up? If either of those 2 are off, re adjust them FIRST.
If after you check the above and its still not right, You'll need to adjust the actual neutral safety/backup light switch. Towards the base of the column you'll see a switch with 2 connectors (4 wires) attached.
Adjust the switch by loosening the 1/4" screws and moving the switch by placing the shift lever in park then rotate the switch counter clockwise until it stops. Or you can just put it in reverse and adjust it so the lights operate in only that position.
|