The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FLcustom10 · 11-13-2011, 10:20 PM

I was having a hard time figuring out how to hook up the throttle linkage and kick-down cable. I finally went with this bracket from Summit Racing:

http://www.summitracing.com/parts/SPE-24283/

At first I couldn't make a Holley connector fit through the slot on the kick-down cable, so I tried a screw and nut, but that didn't work well so I used a dremel tool to make the connector a little bit smaller and then forced it through with some pliers.

11-13-2011, 10:20 PM	#120
FLcustom10 Registered User Join Date: Feb 2007 Location: Tallahassee, FL Posts: 322	Re: Slowly I build a truck I was having a hard time figuring out how to hook up the throttle linkage and kick-down cable. I finally went with this bracket from Summit Racing: http://www.summitracing.com/parts/SPE-24283/ At first I couldn't make a Holley connector fit through the slot on the kick-down cable, so I tried a screw and nut, but that didn't work well so I used a dremel tool to make the connector a little bit smaller and then forced it through with some pliers. Attached Images