|
Re: Finally starting my Longhorn 4x4 conversion
I have a press to remove and install the bearings. I just don't have any shims or stock the right size to support the hub to get it secured on the press. These bearings are a sealed unit and 2" thick and roughly 2.5" in diameter. Plus the bearings are $100 ea and a used hub is $150 on up so I really dont want to damage either.
Posted via Mobile Device
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project
Tired of spark plugs? Check this out.
|