The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**The Rocknrod** · 01-27-2018, 07:47 AM

Well the input shaft bearing and seals are too large in the Edelmann 7857 kit. So I called Orielly and have a Precision Power Steering Steering Gear Input Shaft Seal Kit
Part #28401454 - https://www.oreillyauto.com/detail/p...rwd?q=28401454
picked up in the morning Saturday (today). I'll take the old seals and see if it's the same.
Well I learned the 77 and latter models of the gear box 7802644 have the smaller input shafts, like mine so thats some info I need to find a seal.

01-27-2018, 07:47 AM	#168
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Well the input shaft bearing and seals are too large in the Edelmann 7857 kit. So I called Orielly and have a Precision Power Steering Steering Gear Input Shaft Seal Kit Part #28401454 - https://www.oreillyauto.com/detail/p...rwd?q=28401454 picked up in the morning Saturday (today). I'll take the old seals and see if it's the same. Well I learned the 77 and latter models of the gear box 7802644 have the smaller input shafts, like mine so thats some info I need to find a seal. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 01-27-2018 at 08:21 AM.