Quote:
Originally Posted by BaroneDog
B.W., Did you remove the corner support at any time during your restoration (area circled in red in photo below)? I would like to remove the corner supports so I can clean underneath them. It looks like I would have to make a cut (see green line in image) to avoid taking the entire length out and drill out some spot welds on the outer edge, but I am not sure if the inner edger (see red arrow in photo) is welded or adhered in any way. Thanks.
|
I didn't remove the support. In the pic I was re-welding the spot welds, some had broken loose, others I think they missed on the assy line! I'm not sure if the inner portion is spot welded not.