[quote=Captainfab;3299120]
Quote:
Originally Posted by Dahawk
The Camaro or Impala's front calipers would match, but I don't know how you would mount them to the spindles on your truck. The biggest issue would be the thicker rotor on the trucks. The aftermarket might be the option for that. I'll have to do some looking and see if there is an OEM caliper that would work.
|
The 98 to 2002 Camaro front caliper is on a 1.25" thick 12" diameter rotor so it would work on the same thickness truck rotor.
The guys on thirdgen.org have worked out ways of putting these PBR calipers onto their spindles that have cast in caliper mount bosses which could be adapted for use on our trucks too.
This caliper could be used on the 14-bolt rear disc conversion that uses the Dana-44 front rotors if you didn't need an e-brake.