The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Hard vacuum line to the carb

**FirstOwner69** · 08-11-2020, 11:23 PM

I also found these valve cover clips for the temp sender wire. They look very familiar, but it looks like my '58 Vette has them. However, they'd work well with aluminum valve covers and possibly steel on these trucks.

https://www.corvettecentral.com/c3-6...n-valve-302055

Sorry for the subject change...

EDIT: After checking further, I think my original valve covers had/have clips welded on to the left valve cover. I'll have to check.

08-11-2020, 11:23 PM	#12
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,839	Re: Hard vacuum line to the carb - questions. I also found these valve cover clips for the temp sender wire. They look very familiar, but it looks like my '58 Vette has them. However, they'd work well with aluminum valve covers and possibly steel on these trucks. https://www.corvettecentral.com/c3-6...n-valve-302055 Sorry for the subject change... EDIT: After checking further, I think my original valve covers had/have clips welded on to the left valve cover. I'll have to check. __________________ Jim Last edited by FirstOwner69; 08-12-2020 at 12:17 AM.