The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Replacing throttle linkage in a 1960 with ??

**cwcarpenter98** · 02-12-2019, 02:45 PM

Here is what I followed: Mark's thread Post #110 is where it starts.

Here is some pics of mine. The pedal is a little too close to the brake pedal, and I ended up having to bend the pedal arm to bring the pedal up towards me more so that it would have full travel. Sometimes the pedal is at an uncomfortable place if driving long distances.
If I were to do it again, I would use the 71-72 pedal. If I find a pedal for a good price, I might go ahead and redo mine

Don't know why the last two pics are flipped, sorry

02-12-2019, 02:45 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Replacing throttle linkage in a 1960 with ?? Here is what I followed: Mark's thread Post #110 is where it starts. Here is some pics of mine. The pedal is a little too close to the brake pedal, and I ended up having to bend the pedal arm to bring the pedal up towards me more so that it would have full travel. Sometimes the pedal is at an uncomfortable place if driving long distances. If I were to do it again, I would use the 71-72 pedal. If I find a pedal for a good price, I might go ahead and redo mine Don't know why the last two pics are flipped, sorry Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson