The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

ericjon262 · 04-26-2019, 03:38 PM

Does your 89 have ABS?

I tripped the shuttle valve, that's why wasn't getting any fluid. I just reset it, and am now going to gravity bleed the brakes before continuing.

The valve was a PITA to reset, only because of it's location on the frame, which is now under my ORD steering box brace. If it isn't flowing to the front brakes, there it a button on the valve you can push to reset it. If it isn't flowing to the rear, you have to remove the porportioning valve from the combination valve, and then push the shuttle valve towards the front circuit, it clicks into place.

04-26-2019, 03:38 PM	#54
ericjon262 Registered User Join Date: Mar 2007 Location: Displaced Floridian/Bremerton, Wa Posts: 281	Re: The Pig Rig! Does your 89 have ABS? I tripped the shuttle valve, that's why wasn't getting any fluid. I just reset it, and am now going to gravity bleed the brakes before continuing. The valve was a PITA to reset, only because of it's location on the frame, which is now under my ORD steering box brace. If it isn't flowing to the front brakes, there it a button on the valve you can push to reset it. If it isn't flowing to the rear, you have to remove the porportioning valve from the combination valve, and then push the shuttle valve towards the front circuit, it clicks into place. __________________ '06 2500 HD 4x4. manual transfer case, crank windows. '88 V10 Suburban 4x4,"The Pig Rig" L05, 700r4, NP208, 4x4 beater camper fun truck project. My trucks don't leak oil, they mark their territory.